Oxfordshire · England
Asbestos Artex Removal in Cumnor, Oxfordshire
Any pre-2000 building in Cumnor may contain asbestos. We offer textured coating testing and removal.
- Loft conversions
- Rented homes refurbished between tenants
- Ceilings due for plastering or skimming
Artex removal near Cumnor
About our artex removal in Cumnor
We remove textured coatings from ceilings, walls, ceiling roses and coated boards, in houses, flats and commercial premises across Cumnor. From loft conversions and extensions and rented homes refurbished between tenants, we deal with coated ceiling roses, stipple finishes and Artex ceilings and more.
Rural homes near Cumnor have often been altered over generations, so coatings may date from earlier work. We start with a clear answer: what the material is, and what that means for your plans.
- Location
- Cumnor (OX2)
- Region
- Oxfordshire
- What we do
- Testing and removal of textured coatings
- Afterwards
- Lab result and consignment note
- Quote
- Written quote for your job
- Call
- 07833 053 749
- Last updated
- 26 October 2026
Prices and what affects them
What changes the cost:
- Disposal costs
- Material and condition
- Travel and parking
- How easy it is to reach
Dealing with asbestos before building work is typically cheaper than finding it mid-job, when everything has to stop.
What to photograph
A few photos can save a site visit:
- The access route
- Damaged areas
- Where we could park
- A clear close-up
We quote each job individually, because no two are the same. Send photos through our quote form, or phone 07833 053 749 to get started.
Places near Cumnor
What else we do in Cumnor
Textured ceilings in Cumnor
Cumnor is about 4 miles north-west of Abingdon-on-Thames, in Oxfordshire. If your Artex job is in Cumnor, let us know about access when you get in touch. Cumnor is one of 443 places in Oxfordshire we cover.
Non-domestic buildings like Cumnor Church of England School (Voluntary Controlled) should already have records of any textured coatings, before decorators start. If you’re refurbishing a rental near Oxford station, coatings can be tested while the flat is empty.
Artex jobs anywhere in OX2 start with the postcode and some photos. That could mean a property on High Street, The Park and The Winnyards. We also carry out Artex jobs in Chawley (1 mile north-east), Filchampstead (1 mile north-west), Henwood (1 mile south-east), Dean Court (2 miles north-east) and Botley (2 miles north-east). Within a short drive, we also work in Oxford (5 miles east), Didcot (9 miles south-east), Bicester (14 miles north-east), Abingdon-on-Thames (4 miles south-east), Witney (8 miles north-west) and Carterton (11 miles west).
Nearby you will also find Westgate Shopping Centre (3.3 miles north-east) and Radcliffe Infirmary (3.6 miles north-east). Green spaces nearby include Lashford Lane Fen and Cumnor Hill.
- Nearby schools include Matthew Arnold School (1.5 miles north-east)
- Local pubs include The Vine Inn (under half a mile north-east)
What we do and don’t cover
To be clear about the scope:
- Untested coatings are tested first, since a negative result changes everything
- Plastering and making good are usually separate jobs
- Larger-scale steam or gel removal must be notified before it starts, so allow time
If you are unsure, describe the job and send photos, and we’ll advise.
Materials we see
- Patched or painted coatings
- Textured walls
- Ceiling roses and cornices (coated)
- Coated plasterboard
- Swirl and stipple patterns
- Artex ceilings
What happens
Waste is bagged and labelled as we go, for disposal at a permitted site. We wear suitable protective equipment for the job, and keeps dust to a minimum.
- Tell us which rooms and surfaces, and roughly how big they are
- We test the coating if it hasn’t been tested
- If it contains asbestos, we agree the method and send a quote
- The room is sealed off and the coating removed wet, never sanded or dry-scraped
- The waste is bagged, the room cleaned and the waste taken to a permitted site
Preparing for the visit
- Ensure we can get to the area
- Ensure pets and children are elsewhere
- Move belongings away from the area, without touching the material
Getting a price
The quickest way to a quote is to send photos and the postcode: just fill in the enquiry form or give us a call on 07833 053 749.
Helpful guides
Can I do it myself?
Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.
A professional job comes with paperwork: results, a report or a consignment note, which buyers and builders may ask for.
Common reasons for Artex jobs in Cumnor
Most problems come during renovation: sanding to smooth a ceiling, scraping it off dry or drilling for lights releases fibres.
These are the materials and situations that most often lead to Artex jobs:
- Flaking textured ceilings
- Ceilings coming down
- Ceilings before skimming
- Landlord refurbishments
Older homes across Cumnor may have coatings added during past renovations.
Comparing quotes
- Which areas and materials are covered
- Whether VAT is included
- What you will receive afterwards: a report, results or waste paperwork
- What isn’t included
Materials we deal with
Coated plasterboard
The coating sits on plasterboard or plaster. Sometimes it’s simpler to remove the boards whole.
Artex ceilings
A small sample from each different coating tells you whether it contains asbestos.
Questions from Cumnor
How far is Cumnor from London?
Cumnor is about 56 miles from central London, well within our area.
Is the Artex in my Cumnor home asbestos?
Some may, but many coatings don’t contain asbestos. Only a test will tell you.
Which asbestos work needs a licence?
Licensed work is work on the materials most likely to release fibres: lagging, sprayed coatings and most asbestos insulating board. Only a contractor holding an HSE licence can do it.
Can you advise before I buy a property?
Of course. With the seller’s agreement, a pre-purchase survey tells you what’s there before you commit.
How quickly can you come out?
Dates are agreed once the quote is accepted. Some work has to be notified to the enforcing authority first, which affects timing.
Does all Artex contain asbestos?
Not necessarily: many textured coatings do not contain asbestos. The only way to know is to test a sample.
Can I put asbestos in a skip?
No. Asbestos is hazardous waste and must go to a site that accepts it. We take it to a permitted site with paperwork.
Is asbestos dangerous?
Asbestos is a hazard when its fibres get into the air. The related diseases often take decades to develop, which is why it’s identified before work.
Your options compared
Testing first can save a lot: if the coating is clear, ordinary methods can be used. A price that looks too good to be true often is: controls, protective equipment, laboratory fees and legal disposal all cost money.
Why choose us
- Work planned to HSE guidance and the regulations
- We identify first and remove only what needs removing
- Waste paperwork for every removal
- Paperwork you can show your buyer, landlord or builder
Read our prices page or published price ranges.
After we have finished in Cumnor
We clean the room and dispose of the waste legally, with a consignment note.
After we’ve finished:
- Book your plasterer after removal
- Keep pets out of the work area
- File the test result and waste note
- Plan around the closed rooms
Things not to do
Do not use a steamer or chemical stripper on an untested coating.
Never sand or dry-scrape Artex before testing.
- Nothing removed blind: unknown materials are tested first
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Everything in writing: quotes, reports, results and waste notes
- Waste sealed and labelled, then taken to a permitted site