Kent · England
Artex Removal for Frinsted
Any pre-2000 building in Frinsted may contain asbestos. Our artex removal service covers testing and removal of Artex and textured coatings.
- Textured walls before a refit
- Ceilings before downlights go in
- Coatings scraped during DIY
Artex removal near Frinsted
Frinsted: your questions answered
Do you cover Frinsted from London?
We cover Frinsted, about 37 miles from central London.
Can you deal with asbestos on rural buildings in the Kent Downs National Landscape?
Yes. The asbestos rules are the same in protected landscapes, but access to farm and rural buildings can take planning.
How dangerous is asbestos?
Breathing in asbestos fibres can cause serious diseases, often decades later. The risk comes mainly from disturbing materials that contain it, so identifying it before work is important.
Can you advise before I buy a property?
Of course. A pre-purchase survey, arranged with the seller’s permission, shows what asbestos is there before you exchange.
How do I know if my property contains asbestos?
You can’t tell by eye. Laboratory analysis of a sample gives the answer, especially in buildings from before 2000.
Can I just skim over it?
It’s an option for an intact coating: covering it leaves it undisturbed. Do not sand it first, and keep a record that it’s there.
Does asbestos always have to come out?
Not necessarily. Sound material that will not be touched can often stay, as long as it’s recorded.
Is a home built after 2000 likely to contain asbestos?
Asbestos was banned in 1999, so a home built after 2000 shouldn’t contain it.
Artex removal for Frinsted properties
Many Artex ceilings contain no asbestos at all. A small sample tells you which you have, so work can go ahead normally if it’s negative. Whether it’s ceilings due to be knocked through or removed and landlord refurbishments, we cover Artex ceilings, coated plasterboard and coated ceiling roses and more.
Rural homes near Frinsted have often been altered over generations, so coatings may date from earlier work. We only recommend work that’s needed, and we will say when the right answer is to leave something alone.
- Where
- Frinsted (ME9)
- Area hub
- Kent
- What we do
- Artex tested, then removed with wet methods
- Paperwork
- Lab result and consignment note
- Price
- Quoted individually, in writing
- Call
- 07833 053 749
- Last updated
- 26 October 2026
Responsibilities for owners
Community buildings count as non-domestic premises, so the duty to manage applies.
Landlords of single homes do not have the same duty to manage as non-domestic duty holders, but contractors still need to know about asbestos before they work.
What we do and do not cover
A few things to be aware of:
- Untested coatings are tested first, since a negative result changes everything
- Plastering and making good are normally separate jobs
- Big jobs need notifying in advance, so allow time
If you are unsure, describe the job and send photos, and we’ll advise.
What we deal with
- Textured walls
- Patched or painted coatings
- Swirl and stipple patterns
- Ceiling roses and cornices (coated)
- Artex ceilings
- Coated plasterboard
Frinsted properties and textured coatings
Frinsted is about 4 miles south of Sittingbourne, in Kent. Anywhere in Frinsted, just send the postcode. We cover all 922 towns and villages in Kent. Our nearest city page is Canterbury, about 16 miles away.
A school like Milstead and Frinsted Church of England Primary School should know from its asbestos register whether coatings have been tested. In older homes in Frinsted, textured ceilings were often added in later decades. Frinsted is within about 4 miles of the Kent Downs National Landscape; cottages and farmhouses nearby can have textured coatings too.
Wherever your property is in ME9, we can help with Artex removal. Streets in the area include The Street, Bottom Pond Road and Dray's Field, and Artex removal is available on all of them. Other places close to Frinsted we cover include Milstead (1 mile north-east), Hollybushes (2 miles east), Bluetown (2 miles east), Wichling (2 miles east) and West Street (2 miles south-east). Larger places within reach include Maidstone (8 miles west), Ashford (12 miles south-east), Sittingbourne (4 miles north), Whitstable (15 miles east), Faversham (8 miles east) and Minster (10 miles north-east).
Other landmarks nearby include Leeds Castle (4 miles south-west) and Laundry Museum (3.8 miles south-west).
- Local pubs include The Blacksmith's Arms Public House (0.5 miles west)
The process
We start by sealing and protecting the room, and keep the coating damp as we work. We arrive at the agreed time, check the area and explain what we’ll do before we start.
- Tell us which rooms and surfaces, and roughly how big they are
- We sample the coating first
- We plan the method and quote
- We seal the room and remove the coating with wet methods
- We clean up and dispose of the waste legally
Before we arrive
- Tell us about parking and access
- Have any previous surveys or test results ready
- Tell us about anything that’s already damaged
How to get a quote
Include any existing survey or test when you call 07833 053 749 or use our quote form.
Helpful guides
What it costs
These are the main things that affect the price of Artex removal:
- The survey scope
- Access to the area
- Waste quantity and disposal
- What the material is and its state
Doing several things in one visit can help, such as testing several materials at once.
Photos that help
For a quick quote, include:
- How we’d reach it
- Where we could park
- An idea of size
- A wide shot showing where the material is
Photos taken from a safe distance are fine: don’t touch the material, just send them through our quote form.
DIY and asbestos
Power tools, sanding and jet-washing release the most fibres.
DIY sampling means disturbing the material yourself. HSE advises that samples are best taken by a competent person.
Places near Frinsted
Other services in Frinsted
What it might be made of
Ceiling roses and cornices
Roses and cornices may be coated.
Patched areas
We may sample patches separately.
Options to consider in Frinsted
You’ll find DIY products for removing Artex, but if it contains asbestos, the job needs proper controls. Always test first. There’s no one-size price, as every job differs. Our cost guides show published ranges, with dates and sources.
What you get
- Lab analysis by an accredited laboratory
- Reports and results you can share
- Quotes that spell out the scope
- Legal disposal, with paperwork
See how we quote or published price ranges.
What happens next
Note which other rooms have coatings, so future work is planned properly.
After we’ve finished:
- File the test result and waste note
- Keep pets away
- Plan where you will stay or work while rooms are closed off
- Send photos of the coatings
Things not to do
Plan testing before the renovation starts.
Do not sand, scrape dry or wire-brush a textured coating before it’s been tested.
- Identify it first: we test or survey before planning removal
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Written paperwork: reports, results and waste consignment notes
- Waste sealed and labelled, then taken to a permitted site