A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Artex Removal for Hollybushes

Artex removal across Hollybushes, for houses, flats and commercial buildings. You get a written quote before anything starts.

  • Ceilings due for rewiring or new downlights
  • Coatings already disturbed
  • Ceilings due to be knocked through or removed

Get a quote Ring 07833 053 749

Artex removal for Hollybushes

Artex removal near Hollybushes

Textured coatings like Artex were used on ceilings and walls for decades, and those applied before 2000 can contain a small amount of asbestos. We test first, then remove the coating with controlled wet methods if needed. People often contact us about ceilings before plastering and ceilings due for rewiring or new downlights, including textured walls, stipple finishes and swirl patterns.

In areas like Hollybushes, textured ceilings appear in older and newer homes. Small jobs get the same care as big ones, with the same attention to the regulations.

Area
Hollybushes (ME9)
Area hub
Kent
Service
Testing and removal of textured coatings
Paperwork
Test result and waste paperwork
Quote
Written quote for your job
Call
07833 053 749
Page updated
26 October 2026
Waste being bagged by workers in full protective equipment

For landlords, agents and businesses

Community buildings count as non-domestic premises, so whoever runs them has a duty to manage asbestos.

If your business premises in Hollybushes were built before 2000, you’re likely to need an asbestos register and a management plan, and contractors must be told what’s there.

Your questions about Artex removal in Hollybushes

Do textured ceilings in Hollybushes homes contain asbestos?

Some older coatings do, and many don’t. Testing a sample is the only way to know.

Do you cover small places like Hollybushes?

We do: small villages are covered too. Tell us about access and parking.

Does weather affect the work?

It depends on the job: indoor jobs aren’t affected, but outdoor removal may be rescheduled for safety.

Does someone need to be there?

We need access to every area in the job.

Should all asbestos be removed?

Not necessarily. Sound material that won’t be touched can often stay, as long as it’s recorded.

How do I know if my property contains asbestos?

Any building built or refurbished before 2000 can contain asbestos. Testing a sample is the only way to know.

How do I get a quote?

Call 07833 053 749 or use our quote form. Tell us the postcode, what the material is and where, and send photos if you can.

Can I just skim over it?

You can, if it’s intact: skimming or boarding over avoids disturbing it. Don’t sand it first, and keep a record that it’s there.

Textured ceilings in Hollybushes

Hollybushes is about 4 miles south of Sittingbourne, in Kent. Hollybushes has a mix of older and newer buildings, and anything from before 2000 may contain asbestos. We work in 922 places across Kent, from the larger towns to small villages. Our nearest city page is Canterbury, about 15 miles away.

For a school such as Milstead and Frinsted Church of England Primary School, the duty holder’s records should show any coatings. For rented flats close to Sittingbourne station, a void period is a good time to deal with textured ceilings. Hollybushes is within about 5 miles of the Kent Downs National Landscape; cottages and farmhouses nearby can have textured coatings too.

We carry out Artex jobs all over the ME9 postcode area. Neighbouring places we cover include Bluetown (1 mile east), Milstead (1 mile north-west), Wichling (1 mile south-east), Doddington (1 mile east) and Frinsted (2 miles west). Further out, we also cover Maidstone (9 miles west), Ashford (12 miles south-east), Canterbury (15 miles east), Sittingbourne (4 miles north), Whitstable (13 miles east) and Faversham (7 miles east).

Well-known places in the area include Sittingbourne Heritage Museum (3.5 miles north) and Newnham Castle (2.7 miles east).

Map of Hollybushes © OpenStreetMap contributors

Materials, one by one

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

Textured walls

They’re tested and removed in the same way as ceilings.

Step by step

At the end, the room is cleaned and checked. We keep the work area clear of other people while we work, so please keep children and pets away.

  1. Tell us which rooms and surfaces, and roughly how big they are
  2. We sample the coating first
  3. If it contains asbestos, we agree the method and send a quote
  4. We seal the room and remove the coating with wet methods
  5. We clean up and dispose of the waste legally

Preparing for the visit

  • Let us know where we can park
  • Move things out of the way carefully
  • Tell neighbours if the work is close to their property

Getting a price

We quote each job individually, because no two are the same. Use our quote form or call 07833 053 749 to get started.

Get a quote

Related guides

Weighing up your options

A low price may mean shortcuts, which releases fibres. Ask about the method and the waste. Grouping jobs together can keep costs down, such as testing several materials at once.

How we work in Hollybushes

  • London, Kent, Surrey, Sussex and beyond
  • Lab analysis by an accredited laboratory
  • Quotes that spell out the scope
  • Identify first, remove only when needed

Read how we quote and published price ranges.

What happens next

The surface is left ready for making good.

If asbestos stays in the building:

  • Book your plasterer after removal
  • Keep pets out of the work area
  • Photos help us quote
  • Give us room sizes

Avoid these

Don’t try DIY removal products on untested coatings.

Test before the builders arrive.

What we do and don’t cover

Every job has limits; these are the usual ones:

  • Untested coatings are tested first, since a negative result changes everything
  • We leave the surface ready for your plasterer
  • Larger-scale steam or gel removal must be notified before it starts, so allow time

If in doubt, ask: we will recommend a test, a survey or removal before booking.

Materials we see

  • Ceiling roses and cornices (coated)
  • Artex ceilings
  • Swirl and stipple patterns
  • Coated plasterboard
  • Textured walls
  • Patched or painted coatings

More about this service

Doing it yourself?

HSE’s advice to the public is not to try to repair or remove asbestos yourself. Licensed materials are strictly for licensed contractors.

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.

How we price Artex removal

Our quotes take into account:

  • The number of samples or the size of the building
  • Material and condition
  • Disposal costs
  • The quantity or area

Sometimes a test shows removal isn’t needed, because the material is clear.

Helping us quote

Before you send photos, a few tips:

  • Where we could park
  • The access route
  • A wide shot showing where the material is
  • A rough size or measurement

The quickest way to a quote is to send photos and the postcode: use our quote form or call 07833 053 749.

  • Nothing removed blind: unknown materials are tested first
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Written paperwork: reports, results and waste consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote