A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Artex Removal in Halfway Street

Artex removal across Halfway Street and nearby, for homes, rented property and workplaces. Planned to HSE guidance, with written results and paperwork.

  • Ceilings due to be knocked through or removed
  • Walls before a kitchen or bathroom refit
  • Coatings already disturbed

Ask for a quote Ring 07833 053 749

Artex removal near Halfway Street

What happens

The coating is softened with water, steam or gel and removed with hand tools, never sanded or scraped dry. We will tell you when we have finished and what you will receive afterwards.

  1. Describe the rooms and coatings
  2. We sample the coating first
  3. If it contains asbestos, we agree the method and send a quote
  4. The room is sealed off and the coating removed wet, never sanded or dry-scraped
  5. The waste is bagged, the room cleaned and the waste taken to a permitted site

Preparing for the visit

  • Have any previous surveys or test results ready
  • Leave the suspect material alone until we arrive
  • Move things out of the way carefully

Ask for a quote

Photos from a safe distance help: do not touch the material, just send them through our quote form.

Ask for a quote

Helpful guides

About our artex removal in Halfway Street

A textured ceiling in good condition is low risk if it’s left alone. The problem comes when it’s sanded, scraped dry, drilled or knocked through during a renovation, which is why testing first matters in Halfway Street. We often deal with stipple finishes, coated ceiling roses and textured walls, and typical jobs are coatings damaged by leaks and coatings already disturbed.

In areas like Halfway Street, textured ceilings appear in older and newer homes, often added during past renovations. You get written paperwork for every job: a report, laboratory results or a waste consignment note, for your records.

Waste being bagged by workers in full protective equipment
Location
Halfway Street (CT15)
County
Kent
Service
Artex tested, then removed with wet methods
Afterwards
Test result and waste paperwork
Price
Written quote for your job
Call
07833 053 749
Updated
26 October 2026

Limits to be aware of

The usual limits are:

  • We leave the surface ready for your plasterer
  • Other asbestos materials found in the room are dealt with separately
  • Larger-scale steam or gel removal must be notified before it starts, which affects the start date

Not sure what you need? Send us photos and we will tell you honestly.

What we deal with

  • Ceiling roses and cornices (coated)
  • Artex ceilings
  • Textured walls
  • Coated plasterboard
  • Swirl and stipple patterns
  • Patched or painted coatings

Read more about the service

Can I do it myself?

HSE’s advice to the public is not to try to repair or remove asbestos yourself. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.

Home testing kits exist, but you have to disturb the material to use one. HSE recommends a competent person takes samples.

Your questions about Artex removal in Halfway Street

How far is Halfway Street from London?

We cover Halfway Street, about 61 miles from central London.

Is the Artex in my Halfway Street home asbestos?

Some older coatings do, and many do not. Testing a sample is the only way to know.

Which asbestos work needs a licence?

It covers the higher-risk materials: pipe lagging, sprayed coatings and most insulating board. It needs a contractor with an HSE licence.

When can you start?

Dates are agreed once the quote is accepted. Some work has to be notified to the enforcing authority first, which affects timing.

I think I’ve damaged asbestos. What now?

Stop work, leave the area and don’t try to clean up. Then ask for advice.

Do you work in flats?

We do. For shared areas, the managing agent or freeholder holds the asbestos information.

Is damaged asbestos an emergency?

First, keep everyone away and don’t clean it up. Then contact us for advice.

Is it OK to scrape off Artex?

Not before testing. Sanding or dry scraping an asbestos coating releases fibres.

What happens next

Tell your plasterer and electrician what was done.

After we’ve finished:

  • Plan where you’ll stay or work while rooms are closed off
  • Keep pets out of the work area
  • Tell us which rooms and roughly how big they are
  • Line up the plasterer for afterwards

Things not to do

Do not try DIY removal products on untested coatings.

Don’t drill or cut into textured ceilings until you know what they contain.

Why people call us in Halfway Street

Leaks and DIY can damage coatings, which can make them crumble.

People typically contact us about one of these:

  • Walls before tiling
  • Coatings damaged by leaks
  • Loft conversions and extensions
  • Ceilings due for rewiring or new downlights

If you are refurbishing a rental near Shepherds Well station, textured ceilings can be tested between tenancies.

Comparing quotes

  • How fibres will be kept down
  • VAT, clearly stated
  • Which laboratory analyses samples
  • For licensed work, a valid HSE licence

Read the checklist

Halfway Street properties and textured coatings

Halfway Street is about 4 miles north-west of Dover, in Kent. In Halfway Street, we hear from homeowners, landlords and businesses about all kinds of jobs. We work in all 922 towns and villages across Kent, from the larger towns to small villages. Our nearest city page is Canterbury, about 9 miles away.

If your home is one of the older properties in Halfway Street, near Church of St Andrew or elsewhere, textured ceilings may date from an earlier renovation. Halfway Street is within about 6 miles of the Kent Downs National Landscape; cottages and farmhouses nearby can have textured coatings too. Halfway Street is within about 6 miles of the coast; indoor work like textured coating removal isn’t affected by the weather.

Anywhere in CT15, Artex removal is available, from busy streets to quiet lanes. Close by, we cover Sibertswold (1 mile north-east), Coldred (1 mile east), Lydden (1 mile south-east), Waldershare (2 miles east) and Eythorne (2 miles north-east). We also cover nearby towns such as Canterbury (9 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (7 miles south), Ramsgate (14 miles north-east) and Broadstairs (15 miles north-east).

A little further out are Buckland Hospital (4.5 miles south-east) and Dover Transport Museum (3.6 miles south-east).

  • Local pubs include The Bricklayers' Arms (0.5 miles north-east)
Map of Halfway Street © OpenStreetMap contributors

A closer look at the materials

Painted coatings

Many coatings have been painted over, but the coating underneath is the same.

Ceiling roses and cornices

We sample them if needed.

Landlords, managing agents and employers

Before maintenance in a rented home, agents may ask about asbestos. A test or a survey gives everyone a clear answer.

Landlords of single homes do not have the same duty to manage as non-domestic duty holders, but contractors still need to know about asbestos before they work.

Your options compared

Very cheap quotes for Artex removal can mean dry scraping or sanding, which releases fibres. Ask about the method and the waste. Every quote says whether VAT is included.

How we work in Halfway Street

  • Waste paperwork for every removal
  • Identify first, remove only when needed
  • Accredited laboratory results
  • Plain-English advice, including when to leave things alone

See our prices page or our cost guide.

  • Nothing removed blind: unknown materials are tested first
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Written paperwork: reports, results and waste consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote