A surveyor in a respirator putting a sample of loft material into a sealed bag

Oxfordshire · England

Artex Removal in Holton

Artex removal for properties in Holton and Oxfordshire: textured coating testing and removal.

  • Landlord refurbishments
  • Structural work through coated ceilings
  • Ceilings due for rewiring or new downlights

Get a quote Call 07833 053 749

Artex removal in Holton

How artex removal works in Holton

Skimming or boarding over an intact coating avoids disturbing it, but the asbestos is still there and should be recorded for future work. Whether it’s textured walls before a refit and coatings already disturbed, we cover coated ceiling roses, coated plasterboard and Artex ceilings and more.

Village homes like those in Holton have often been altered several times, so ceilings may have been coated during an earlier renovation. If you are unsure what you need, ask: we will recommend a test, a survey or removal, whichever fits.

A sealed sample bag held up by a surveyor
Where
Holton (OX33)
Region
Oxfordshire
Covers
Testing and removal of textured coatings
Paperwork
Test result and waste paperwork
Quotes
Written quote for your job
Call
07833 053 749
Page updated
26 October 2026

Artex removal around Holton

Holton is about 4 miles east of Oxford, in Oxfordshire. Holton is part of the area we cover, on everything from houses and flats to workplaces and garages. Holton is one of 443 towns and villages in Oxfordshire we cover.

Non-domestic buildings like Wheatley Park School should already have records of any textured coatings, before decorators start.

Artex jobs anywhere in OX33 start with the postcode and some photos. We also carry out Artex jobs in Wheatley (1 mile south), Littleworth (1 mile south-west), Forest Hill (1 mile north-west), Horspath (2 miles south-west) and Stanton St John (2 miles north-west). Further out, we also cover Oxford (4 miles west), Didcot (11 miles south-west), Bicester (10 miles north), Abingdon-on-Thames (8 miles south-west), Witney (15 miles west) and Thame (7 miles east).

Well-known places in the area include Waterperry Gardens Rural Museum (2 miles east) and Templars Square (3.8 miles south-west). Open spaces near Holton include Shotover and CS Lewis Nature Reserve.

  • Local schools include Wheatley Church of England Primary School (0.6 miles south-west)
  • Local pubs include The Sun Inn (0.5 miles south)
Map of Holton © OpenStreetMap contributors

Step by step

If we’re taking the boards down instead, they’re removed whole where possible and bagged or wrapped. Before we start, we walk through the job with you and answer any questions.

  1. Tell us where the textured ceilings and walls are
  2. We sample each different coating for testing
  3. If asbestos is found, we explain the options and quote
  4. We seal off each room and remove the coating wet, or take the boards down whole
  5. The room is cleaned and the waste goes to a permitted site with paperwork

Preparing for the visit

  • Ensure we can get to the area
  • Keep the area clear of children and pets
  • Keep away from the material in the meantime

Ask for a quote

Photos and a postcode help us quote quickly: call 07833 053 749 or use our quote form.

Ask for a quote

Helpful guides

Landlords, managing agents and employers

Before maintenance in a rented home, agents may ask about asbestos. A test or survey gives a definite answer.

If you’re responsible for a non-domestic building or the common parts of flats in Holton, you have a duty to manage asbestos under the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.

Materials, one by one

Painted coatings

The sample includes the coating itself.

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

What we deal with in Holton

Asbestos-free coatings were also made, so testing is the only way to know.

These come up again and again:

  • Coatings damaged by leaks
  • Ceilings due for rewiring or new downlights
  • Loft conversions
  • Ceilings before plastering

Older homes across Holton may have coatings added during past renovations.

What your quote should include

  • What you will receive afterwards: a report, results or waste paperwork
  • That samples are analysed by an accredited laboratory
  • If the price includes VAT
  • The method and controls

Read the checklist

Which option is right?

Plastering over it is an option, but never sand it first, and it remains in place. Very low prices can mean corners are being cut: proper controls, lab analysis and legal waste disposal cost money.

What you get

  • Paperwork you can show your buyer, landlord or builder
  • Clear written quotes
  • Lab analysis by an accredited laboratory
  • No removal until we know what it is

Take a look at how we quote or published price ranges.

After the job

File the result and the paperwork.

After we’ve finished:

  • Plan around the closed rooms
  • Test every different coating
  • Line up the plasterer for afterwards
  • Keep pets away

Don’ts

Do not try DIY removal products on untested coatings.

Do not try DIY removal products on untested coatings.

Holton questions

Do you come out to small villages like Holton?

Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.

Do you cover Holton from London?

We cover Holton, about 48 miles from central London.

Is my textured ceiling in Holton asbestos?

Not every coating does: many coatings are asbestos-free. Testing a sample is how you find out.

How do I know if my property contains asbestos?

You can’t tell by eye. A sample analysed in a laboratory is the reliable way to find out, especially in buildings from before 2000.

When can you start?

We agree a date when you accept the quote. Some work has to be notified to the enforcing authority first, which affects timing.

My builder has found asbestos. What now?

Stop work in that area and keep people out, then have the material identified before anything else happens.

Is asbestos dangerous?

Asbestos is a hazard when its fibres get into the air. Diseases linked to it, such as mesothelioma and asbestosis, can appear many years later, so the aim is never to disturb it unknowingly.

Is Artex removal licensed work?

Normally not: HSE treats textured coating work as normally non-licensed, but larger-scale steam or gel removal must be notified first.

Limits to be aware of

The usual limits are:

  • Other materials may need their own approach
  • The room being worked on has to be empty and sealed off
  • Untested coatings are tested first, because a clear result means ordinary methods can be used

If you’re unsure, describe the job and send photos, and we will advise before booking.

Materials in Holton

  • Textured walls
  • Patched or painted coatings
  • Ceiling roses and cornices (coated)
  • Coated plasterboard
  • Swirl and stipple patterns
  • Artex ceilings

Read more about the service

Can I do it myself?

Working on a fragile asbestos cement roof is dangerous in itself, quite apart from the asbestos, so stay off it.

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials.

  • Nothing removed blind: unknown materials are tested first
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Written paperwork: reports, results and waste consignment notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote