Oxfordshire · England
Asbestos Artex Removal in Kingwood Common, Oxfordshire
Artex removal in Kingwood Common: Artex removal, with testing first. Tell us what you’ve found and we will explain your options.
- Ceilings coming down
- Coatings scraped during DIY
- Ceilings due for plastering or skimming
Need Artex removal in Kingwood Common?
Artex removal in Kingwood Common
For an asbestos coating, the room is sealed, the coating kept wet and nothing sanded or dry-scraped. Typical jobs include walls before tiling and ceilings coming down, including coated ceiling roses, Artex ceilings and textured walls.
Village homes like those in Kingwood Common have often been altered several times, so coatings may date from earlier work. Every quote is in writing and spells out what’s covered, so there are no surprises.
- Location
- Kingwood Common (RG9)
- County
- Oxfordshire
- Covers
- Artex tested, then removed with wet methods
- Paperwork
- Result and waste note
- Quotes
- A written quote before work starts
- Call
- 07833 053 749
- Last updated
- 26 October 2026
Artex in Kingwood Common homes
Kingwood Common is about 4 miles north of Caversham, in Oxfordshire. If your Artex job is in Kingwood Common, let us know about access. We work in all 443 towns and villages across Oxfordshire, from the larger towns to small villages. You can also see our page for Reading, about 6 miles away.
In older homes in Kingwood Common, textured ceilings were often added in later decades. If you are refurbishing a rental near Henley-On-Thames station, a void period is a good time to deal with textured ceilings. Parts of the Chilterns National Landscape are within about 8 miles of Kingwood Common, and older rural homes there often have textured ceilings from past renovations.
We handle Artex jobs in every part of the RG9 postcode area and the streets around it. Streets in the area include Stevens Lane, Stoke Row Road and Dove Lane, and Artex removal is available on all of them. For properties just outside Kingwood Common, we cover Peppard Hill (1 mile south-east), Rotherfield Peppard (1 mile east), Sonning Common (1 mile south-east), Shepherd's Green (1 mile north-east) and Highmoor Cross (1 mile north). Further out, we also cover Didcot (12 miles north-west), Thame (15 miles north), Henley-on-Thames (4 miles east), Benson (8 miles north-west), Chinnor (12 miles north) and Tilehurst (5 miles south).
A little further out are Battle Hospital (5.1 miles south). Green spaces nearby include Warburg Nature Reserve.
- Local schools include Maiden Erlegh Chiltern Edge (1.3 miles south) and The Warwick School (1.3 miles south)
- Pubs nearby include The Unicorn pub (within half a mile south-east)
FAQs for Kingwood Common
Do you come out to small villages like Kingwood Common?
Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.
Do you cover Kingwood Common from London?
We cover Kingwood Common, about 39 miles from central London.
Can I put asbestos in a skip?
No. Asbestos is hazardous waste and must go to a site that accepts it. When we remove it, it’s taken to a permitted site with a consignment note.
Is my textured ceiling in Kingwood Common asbestos?
Not necessarily: many coatings are asbestos-free. A sample test tells you which you have.
Do you need a licence to remove Artex?
Normally not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.
Which asbestos work needs a licence?
It covers the higher-risk materials: lagging, sprayed coatings and most asbestos insulating board. It needs a contractor with an HSE licence.
Do you work in Kingwood Common?
Yes, Kingwood Common is in our area. Tell us the postcode and what you need.
Can you quote from photos?
Many jobs can be quoted from photos, but larger or unclear jobs may need a visit.
Options to consider in Kingwood Common
Testing first can save a lot: a clear result means normal methods. A test can sometimes save the cost of removal altogether, if the material turns out not to contain asbestos.
How we work in Kingwood Common
- Homes, rented property and workplaces
- Jobs planned to HSE guidance
- Samples analysed by an accredited laboratory
- Clear written quotes
Read how we price jobs and our cost guide.
What it might be made of
Coated plasterboard
The coating sits on plasterboard or plaster. Removing the boards can be an option.
Artex ceilings
Swirl, stipple and other patterns on ceilings are the most common textured coatings.
The scope of Artex removal
It’s worth knowing what Artex removal does and doesn’t cover:
- Plastering and making good are usually separate jobs
- The room being worked on has to be empty and sealed off
- Other materials may need their own approach
If you are unsure, describe the job and send photos, and we’ll advise before booking.
Common materials
- Patched or painted coatings
- Textured walls
- Coated plasterboard
- Artex ceilings
- Swirl and stipple patterns
- Ceiling roses and cornices (coated)
Step by step
If we are taking the boards down instead, they’re removed whole where possible and bagged or wrapped. Our team uses the right protective equipment, and use controls to keep dust down.
- Tell us where the textured ceilings and walls are
- Each coating is sampled and tested
- We go through the options and send a quote
- We seal off each room and remove the coating wet, or take the boards down whole
- The room is cleaned and the waste goes to a permitted site with paperwork
Before we arrive
- Let neighbours know if the work is near them
- Keep the area clear of children and pets
- Make sure we can get to the area
Ask for a quote
The quickest way to a quote is to send photos and the postcode: ring 07833 053 749, or send the details through our contact page.
Read more
What it costs
Quotes vary because of:
- Licensed or non-licensed
- Access: height, lofts, steps and space
- What the material is and its state
- The size of the job
There is no one-size price, as every job differs. Our guides list published price ranges from other companies, with sources.
Helping us quote
Good photos help us plan and quote. Take them without disturbing anything:
- A close-up from a safe distance
- The parking area
- A wide shot showing where the material is
- Labels, if any
Each job is priced individually. To start, ring 07833 053 749, or send the details through our contact page.
Should you do it yourself?
Asbestos waste can’t go in household bins, recycling or skips. It must go to a permitted site; check with your council about small amounts.
DIY sampling means disturbing the material yourself. HSE recommends a competent person takes samples.
Places near Kingwood Common
Also in Kingwood Common
Looking after things afterwards
The ceiling or wall is left ready for your plasterer.
Looking after any asbestos that remains:
- Keep pets away
- Photos help us quote
- Each different coating needs testing
- Book your plasterer after removal
Don’ts
Never sand or dry-scrape Artex before testing.
If a coating has been damaged by a leak, keep people away from fallen pieces and ask for advice.
Why people call us in Kingwood Common
Textured coatings were popular for decades because they hid cracks and uneven plaster, and some included a little chrysotile.
These are the materials and situations that most often lead to Artex jobs:
- Coatings damaged by leaks
- Walls before tiling
- Ceilings before downlights go in
- Coatings damaged by DIY
Non-domestic buildings like Peppard Church of England Primary School should already have records of any textured coatings.
What to look for in a quote
- Any exclusions
- Proof of an HSE licence where it’s needed
- Waste disposal and the consignment note
- Suitable insurance for the work
- Identify it first: we test or survey before planning removal
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Written paperwork: reports, results and waste consignment notes
- Waste sealed and labelled, then taken to a permitted site