Oxfordshire · England
Asbestos Artex Removal in Milcombe, Oxfordshire
Found something that might be asbestos in Milcombe? Our service covers textured coating testing and removal, with clear advice at each step.
- Ceilings coming down
- Textured walls before a refit
- Coatings in the way of electrical work
Artex removal in Milcombe
About our artex removal in Milcombe
We remove textured coatings from ceilings, walls, ceiling roses and coated boards, in houses, flats and commercial premises across Milcombe. Typical materials include coated ceiling roses, Artex ceilings and coated plasterboard, and people generally contact us about coatings damaged by leaks and rented homes refurbished between tenants.
In a village like Milcombe, textured coatings turn up in cottages and later homes alike. Every job comes with paperwork, because buyers, landlords and builders often ask for it.
- Area
- Milcombe (OX15)
- Region
- Oxfordshire
- What we do
- Testing and removal of textured coatings
- Afterwards
- Lab result and consignment note
- Quote
- A written quote before work starts
- Call
- 07833 053 749
- Updated
- 26 October 2026
What happens next
Covered coatings should be recorded.
A few practical points:
- File the test result and waste note
- Plan where you’ll stay or work while rooms are closed off
- Give us room sizes
- Photos help us quote
What to avoid
Never sand or dry-scrape Artex before testing.
Hold off on drilling until you have a result.
Step by step
On the day, we seal off the room and protect floors and fittings, and keep the coating damp as we work. While we work, the area stays out of bounds, so arrange for pets and children to be elsewhere.
- Let us know which rooms have textured coatings
- We sample each different coating for testing
- If asbestos is found, we explain the options and quote
- We seal off each room and remove the coating wet, or take the boards down whole
- We clean up and send the waste paperwork
Getting ready
- Tell neighbours if the work is close to their property
- Keep children and pets away on the day
- Find any old asbestos reports
How to get a quote
We quote each job individually, because no two are the same. Use our quote form or call 07833 053 749 to get started.
Helpful guides
Also near Milcombe
What else we do in Milcombe
Your questions about Artex removal in Milcombe
Is asbestos common in Milcombe homes?
It depends on its age and history: asbestos was used until the 1999 ban, so older homes and older alterations in Milcombe can contain it. Common places include garage roofs, textured ceilings, floor tiles, soffits and flues.
How far is Milcombe from London?
We cover Milcombe, about 66 miles from central London.
Do you need a licence to remove Artex?
Usually not: HSE treats textured coating work as normally non-licensed, but larger-scale steam or gel removal must be notified first.
Can you quote from photos?
Clear photos and measurements are often enough; if not, we’ll arrange to see it.
Can I sand my Artex ceiling smooth?
Not before testing. If it contains asbestos, sanding releases fibres.
How quickly can you come out?
It depends on the job and our diary. You’ll get available dates with the quote.
Do I need to be at home?
Someone has to let us into all the areas in the job.
How can I get a price?
Start with the postcode and a description of the material, with photos if possible. To do that, fill in the enquiry form or give us a call on 07833 053 749.
What’s included, and what is not
The usual limits are:
- We test before removal, since a negative result changes everything
- The room being worked on has to be empty and sealed off
- Other asbestos materials found in the room are dealt with separately
If in doubt, ask: we will recommend a test, a survey or removal.
Common materials
- Artex ceilings
- Coated plasterboard
- Ceiling roses and cornices (coated)
- Textured walls
- Patched or painted coatings
- Swirl and stipple patterns
Artex removal around Milcombe
Milcombe is about 4 miles south-west of Banbury, in Oxfordshire. Anywhere in Milcombe, just send the postcode, and we will quote. We cover 443 places in Oxfordshire, from the larger towns to small villages. Our nearest city page is Oxford, about 19 miles away.
A school like Bloxham Church of England Primary School should know from its asbestos register whether coatings have been tested. In older homes in Milcombe, textured ceilings were often added in later decades.
This part of Oxfordshire takes in OX15. From Station Road, Barlow Close and Main Road or anywhere nearby, we can help. Neighbouring places we cover include Tadmarton (2 miles north-west), Swalcliffe (3 miles north-west), Sibford Ferris (4 miles north-west), Burdrop (4 miles north-west) and Shutford (4 miles north-west). Within a short drive, we also work in Banbury (4 miles north-east), Bicester (13 miles south-east), Kidlington (14 miles south), Bure Park (13 miles south-east), Chipping Norton (8 miles south-west) and Neithrop (4 miles north-east).
Well-known places in the area include Broughton Castle (2.2 miles north) and Horton General Hospital (4.2 miles north-east). Green spaces nearby include Woodford Bottom and Lamb's Pool and Crouch Hill.
- Local schools include The Warriner School (2 miles north-east)
- Nearby, you’ll find The Horse & Groom pub (under half a mile west)
Materials we deal with
Ceiling roses and cornices
We sample them if needed.
Coated plasterboard
Taking boards down whole avoids stripping the coating.
Which option is right?
Very cheap quotes for Artex removal can mean dry scraping or sanding. Ask about the method and the waste. Identifying asbestos early is cheaper than stopping work later, when the whole project can be held up.
How we work in Milcombe
- Samples analysed by an accredited laboratory
- London, Kent, Surrey, Sussex and beyond
- Reports and results you can share
- Identify first, remove only when needed
See our prices page and our cost guide.
How we price Artex removal
Every quote reflects:
- The type of material and its condition
- Parking and access charges
- Access to the area
- Disposal costs
Very low prices can mean corners are being cut: proper controls, lab analysis and legal waste disposal cost money.
What to photograph
A few photos can save a site visit:
- Damaged areas
- Labels, if any
- A picture of the whole area
- Street parking nearby
Send us the address in Milcombe, a description and some photos: use our quote form or call 07833 053 749.
Can I do it myself?
Working on a fragile asbestos cement roof is dangerous in itself, quite apart from the asbestos, so stay off it.
Home testing kits exist, but you have to disturb the material to use one. HSE recommends a competent person takes samples.
Why people call us in Milcombe
Coatings get damaged by water leaks, cracks and DIY, which can make them crumble.
If any of these sound familiar, it’s worth getting advice:
- Ceilings due for rewiring or new downlights
- Coatings damaged by DIY
- Walls before tiling
- Ceilings due for plastering or skimming
If you’re refurbishing a rental near Banbury station, coatings can be tested while the flat is empty.
Questions to ask before you book
- Which areas and materials are covered
- What’s excluded, such as making good or a new roof
- Whether the job needs notifying
- For licensed work, a valid HSE licence
- Identify it first: we test or survey before planning removal
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Everything in writing: quotes, reports, results and waste notes
- Asbestos waste double-bagged or wrapped and taken to a permitted site