Oxfordshire · England
Artex Removal in Milton Heights
Need Artex removal in Milton Heights? We work across Milton Heights and the towns around it, with clear advice and a written quote.
- Loft conversions and extensions
- Ceilings before skimming
- Ceilings due for rewiring or new downlights
Artex removal for Milton Heights
What it might be made of
Painted coatings
Many coatings have been painted over, but the coating underneath is the same.
Coated plasterboard
Board removal avoids stripping.
Artex removal for Milton Heights properties
Textured coatings like Artex were used on ceilings and walls for decades, and those applied before 2000 can contain a small amount of asbestos. We test first, then remove the coating with controlled wet methods if needed. Whether it’s coatings scraped during DIY and ceilings before skimming, we cover stipple finishes, Artex ceilings and textured walls.
In areas like Milton Heights, textured ceilings appear in older and newer homes. Not sure what you need? Just ask: we will tell you honestly whether it’s a test, a survey or removal.
- Area
- Milton Heights (OX14)
- Area hub
- Oxfordshire
- What we do
- Textured ceilings and walls
- Paperwork
- Result and waste note
- Price
- Quoted individually, in writing
- Call
- 07833 053 749
- Updated
- 26 October 2026
What affects the price in Milton Heights
The cost depends on:
- How much there is
- How much waste there is
- How many samples are needed
- The type of material and its condition
There’s no one-size price, as every job differs. Our guides list published price ranges from other companies, with sources.
Sending photos
The most useful photos are:
- A picture of the whole area
- Labels, if any
- Where we could park
- A close-up from a safe distance
We quote each job individually, because no two are the same. Send photos through our quote form, or phone 07833 053 749 to get started.
What happens
We wear disposable coveralls and suitable respirators, and keep the room closed while we work. Nobody else needs to be in the work area, so children and pets should be kept elsewhere.
- Tell us which rooms and surfaces, and roughly how big they are
- We test the coating if it hasn’t been tested
- If it contains asbestos, we agree the method and send a quote
- The room is sealed off and the coating removed wet, never sanded or dry-scraped
- We clean up and dispose of the waste legally
Before we arrive
- Clear belongings, but leave the material alone
- Keep children and pets away on the day
- Mention any damage before we arrive
How to get a quote
To get a quote, call 07833 053 749 or use our quote form. Tell us the postcode, what the material is and where, and send photos if you can.
Helpful guides
Also near Milton Heights
Other services in Milton Heights
Should you do it yourself?
Home testing kits exist, but you have to disturb the material to use one. HSE advises that samples are best taken by a competent person.
HSE advises the public not to repair or remove asbestos themselves. Licensed materials are strictly for licensed contractors.
Questions from Milton Heights
Is the Artex in my Milton Heights home asbestos?
Some older coatings do, and many don’t. Testing a sample is the only way to know.
Do you work near Didcot Parkway station?
Yes, we cover Milton Heights and the area towards Didcot Parkway station, about 2.6 miles east.
Is Artex removal licensed work?
HSE’s code of practice says it will not normally be licensable. Larger-scale removal using steam or gel is notifiable non-licensed work.
Do you need to see it before quoting?
Clear photos and measurements are often enough; otherwise we will arrange a visit.
How much does Artex removal cost in Milton Heights?
Room sizes, the method and the waste decide, so we quote after testing.
How do I get a quote?
Just call 07833 053 749 or use our quote form. Include the postcode, a description and photos.
Does all Artex contain asbestos?
Not every coating does: many coatings are asbestos-free. A sample test tells you which you have.
Do I need a test or a survey?
A test answers the question for the materials sampled; a survey inspects the whole building or work area and records everything it finds.
Textured ceilings in Milton Heights
Milton Heights is about 2 miles west of Didcot, in Oxfordshire. Anywhere in Milton Heights, just send the postcode. Milton Heights is one of 443 towns and villages in Oxfordshire we cover. We work right across the region, from Milton Heights to Oxford (about 10 miles away).
If you’re refurbishing a rental near Didcot Parkway station, a void period is a good time to deal with textured ceilings. Non-domestic buildings like St Blaise CofE Primary School should already have records of any textured coatings. Milton Heights is within about 8 miles of the North Wessex Downs National Landscape; cottages and farmhouses nearby can have textured coatings too.
This part of Oxfordshire takes in OX14, and your Artex job can be anywhere in it. Whether your property is on Midwinter Avenue, Trenchard Avenue and Lambe Avenue or anywhere nearby, we can help. Other places close to Milton Heights we cover include Milton Hill (1 mile south), Steventon (1 mile north-west), Drayton (2 miles north), Sutton Wick (2 miles north) and Marcham (4 miles north-west). Within a short drive, we also work in Oxford (10 miles north), Abingdon-on-Thames (4 miles north), Witney (14 miles north-west), Wantage (5 miles west), Grove (5 miles west) and Faringdon (12 miles west).
Well-known places in the area include Atlas Computer Laboratory (2.9 miles south) and Abingdon Community Hospital (3.7 miles north). The countryside around Milton Heights includes Churn Hill and Mowbray Fields.
- Local schools include UTC Oxfordshire (1.5 miles south-east) and UTC Oxfordshire (1.5 miles south-east)
- Local pubs include The Cherry Tree pub (0.8 miles north-west)
What we do and don’t cover
We’re upfront about what’s included:
- Big jobs need notifying in advance, which affects the start date
- We need the room cleared
- Other materials may need their own approach
If in doubt, ask: we’ll recommend a test, a survey or removal before booking.
Materials we see
- Textured walls
- Coated plasterboard
- Patched or painted coatings
- Swirl and stipple patterns
- Artex ceilings
- Ceiling roses and cornices (coated)
What we deal with in Milton Heights
Leaks and DIY can damage coatings, so they may start to flake.
People generally contact us about one of these:
- Landlord refurbishments
- Coatings damaged by leaks
- Ceilings due to be knocked through or removed
- Coatings already disturbed
In older homes in Milton Heights, textured ceilings were often added in later decades.
Comparing quotes
- How the work will be done, and the controls used
- The documents you’ll receive
- Suitable insurance for the work
- What category of work it is
Which option is right?
Plastering over it avoids disturbing it, but do not sand it smooth first, and the asbestos stays in the building. Dealing with asbestos before building work is generally cheaper than finding it mid-job, when everything has to stop.
Why us?
- Clear written quotes
- We identify first and remove only what needs removing
- Honest advice, even when the answer is to leave it
- Covering London and the South East
Read our prices page and the cost guide.
For businesses and landlords in Milton Heights
Duty holders for workplaces and the shared parts of flats in Milton Heights must manage asbestos under the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.
Before contractors start, they need to know about any asbestos. HSE’s campaigns stress this point to building owners and trades alike.
- Survey or test first when it isn’t clear what a material is
- Done to the regulations: HSE guidance and CAR 2012
- Paperwork for your records: reports, lab results and consignment notes
- Asbestos waste double-bagged or wrapped and taken to a permitted site