A surveyor in a respirator putting a sample of loft material into a sealed bag

Greater London · England

Asbestos Artex Removal in Three Mills, Greater London

Artex removal in Three Mills: textured coating testing and removal. Send us photos and we will tell you what you need.

  • Rented flats before redecoration
  • Damaged or cracked coatings
  • Coatings already disturbed

Ask for a quote Call 07833 053 749

Need Artex removal in Three Mills?

Artex removal around Three Mills

Three Mills is about 1 mile south of Stratford, in Greater London. If your Artex job is in Three Mills, let us know about access. We cover 764 places in Greater London, from the larger towns to small villages.

If you are refurbishing a rental near West Ham station, coatings can be tested while the flat is empty. Older homes across Three Mills may have coatings added during past renovations.

We carry out Artex jobs all over E3, E15 and E14 and the streets around it. Streets in the area include Gay Road, Bruce Road and Edgar Road, and Artex removal is available on all of them. If your property is just outside Three Mills, we also cover Mill Meads (1 mile north), Bromley (1 mile south-west), Old Ford (1 mile north-west), Bow (1 mile west) and Bow Common (1 mile south-west). Within a short drive, we also work in London (4 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (9 miles west), St Pancras (5 miles west) and Shoreditch (3 miles west).

Three Mills is in London, inside the Ultra Low Emission Zone, where parking and loading can be restricted: let us know about parking and access when you get in touch.

Other landmarks nearby include County Borough of West Ham (1 mile north-east) and Stratford Centre (1 mile north). Open spaces near Three Mills include Hollow Pond and Old Ford Island.

  • Schools near Three Mills include London International School of Performing Arts (within half a mile east) and Manorfield Primary School (within half a mile west)
  • Pubs nearby include Rose and Crown pub (within half a mile west)
Map of Three Mills © OpenStreetMap contributors

Artex removal for Three Mills properties

Many Artex ceilings contain no asbestos at all. A small sample tells you which you have, so work can go ahead normally if it’s negative. Typical jobs include damaged or cracked coatings and walls before a kitchen or bathroom refit, involving coated ceiling roses, stipple finishes and swirl patterns.

In London conversions like those in Three Mills, one ceiling may have several coatings from different decades, so each may need testing. Every job comes with paperwork, which is useful when you sell, let or build.

A surveyor in a respirator and gloves making notes on a tablet in a utility room
Where
Three Mills (E3, E15, E14)
Area hub
Greater London
Covers
Textured ceilings and walls
You receive
Result and waste note
Quote
Written quote for your job
Phone
07833 053 749
Last updated
26 October 2026

What happens next

Tell your plasterer and electrician what was done.

If asbestos stays in the building:

  • Keep pets away
  • Book your plasterer after removal
  • Tell us which rooms and roughly how big they are
  • Test every different coating

Avoid these

Never sand or dry-scrape Artex before testing.

Don’t drill or cut into textured ceilings until you know what they contain.

Options to consider in Three Mills

A test before removal can save money: a clear result means normal methods. How easy the material is to reach affects the price, so tell us about access.

Why people choose us

  • Homes, rented property and workplaces
  • Clear written quotes
  • Jobs planned to HSE guidance
  • Covering London and the South East

Take a look at our prices page or the cost guide.

How it works

We finish by cleaning the room thoroughly. It helps if we can park nearby, so let us know about any restrictions.

  1. Get in touch with photos
  2. We test a sample of each coating
  3. We talk through the options
  4. We carry out the removal
  5. We dispose of the waste legally

Before we arrive

  • Dig out previous surveys
  • Tell us about parking and access
  • Ensure pets and children are elsewhere

Get a quote

Not sure what you need? Ring 07833 053 749, or send the details through our contact page and describe the problem, and we will advise.

Get a quote

Helpful guides

Prices and what affects them

Prices vary with:

  • How many samples are needed
  • How much waste there is
  • What the material is and its state
  • How easy it is to reach

Very low prices can mean corners are being cut: controls, protective equipment, laboratory fees and legal disposal all cost money.

Helping us quote

For a quick quote, include:

  • A rough size or measurement
  • The access route
  • A closer photo of the material, without touching it
  • An overall view

Share the postcode, a short description and photos: ring 07833 053 749, or send the details through our contact page.

Good to know

Here’s what Artex removal covers, and what it doesn’t:

  • Big jobs need notifying in advance, which affects the start date
  • The room being worked on has to be empty and sealed off
  • We test before removal, since a negative result changes everything

If you are unsure, describe the job and send photos, and we will advise.

Common materials

  • Swirl and stipple patterns
  • Coated plasterboard
  • Artex ceilings
  • Patched or painted coatings
  • Ceiling roses and cornices (coated)
  • Textured walls

Service details

Why people call us in Three Mills

Many electricians and plasterers ask for a test result before working on textured ceilings.

These come up again and again:

  • Coatings damaged by leaks
  • Walls before a kitchen or bathroom refit
  • Ceilings due for plastering or skimming
  • Landlord refurbishments

Non-domestic buildings like East London Science School should already have records of any textured coatings, before decorators start.

Questions to ask before booking

  • How the work will be done, and the controls used
  • Which laboratory analyses samples
  • Whether the job needs notifying
  • Where the waste goes, with paperwork

How to choose an asbestos contractor

DIY and asbestos

HSE’s advice to the public is not to try to repair or remove asbestos yourself. Licensed materials are strictly for licensed contractors.

Power tools, sanding and jet-washing release the most fibres, so avoid them completely.

What it might be made of

Coated plasterboard

Taking boards down whole avoids stripping the coating.

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

Common questions in Three Mills

Can you work in Three Mills with London’s parking rules?

We do. Let us know the parking situation and we’ll plan around it.

Do textured ceilings in Three Mills homes contain asbestos?

Some older coatings do, and many don’t. Testing a sample is the only way to know.

Do you need to see it before quoting?

Often we can quote from clear photos and a description; otherwise we will arrange a visit.

What paperwork will I get?

That depends on the job: a survey report, a laboratory result, or a consignment note for removed waste.

Is damaged asbestos an emergency?

First, keep everyone away and don’t clean it up. Then contact us and we will advise on the next step.

How do I know if my property contains asbestos?

Any building built or refurbished before 2000 can contain asbestos. Only laboratory analysis of a sample can confirm it.

Can you help with a shop or office?

We do. Send us the details of the premises.

Which asbestos work needs a licence?

Work on higher-risk materials, such as lagging, sprayed coatings and most insulating board, is licensed and must be done by an HSE-licensed contractor. Most asbestos cement and textured coatings are non-licensed or notifiable non-licensed.

  • Survey or test first when it isn’t clear what a material is
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Everything in writing: quotes, reports, results and waste notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote