Hampshire · England
Artex Removal for Tinkers Cross
Worried about asbestos in Tinkers Cross? Our service covers removal of textured ceilings and walls, with clear advice at each step.
- Coatings in the way of electrical work
- Coatings damaged by DIY
- Ceilings before skimming
Artex removal in Tinkers Cross
Should you do it yourself?
Asbestos waste cannot go in household bins, recycling or skips. It must go to a permitted site; check with your council about small amounts.
Fragile roofs are a serious falls risk, quite apart from the asbestos, so never climb onto one.
Artex removal for Tinkers Cross properties
Removing an asbestos textured coating means sealing off the room, keeping the coating wet and never sanding or scraping it dry. Typical jobs include ceilings due for plastering or skimming and ceilings coming down, including stipple finishes, textured walls and Artex ceilings.
Rural homes near Tinkers Cross have often been altered over generations, so ceilings may have been coated during an earlier renovation. Every quote is in writing and spells out what’s covered, so there are no surprises.
- Where
- Tinkers Cross (SP6)
- Region
- Hampshire
- What we do
- Textured ceilings and walls
- You receive
- Test result and waste paperwork
- Price
- Quoted individually, in writing
- Telephone
- 07833 053 749
- Last updated
- 26 October 2026
Textured ceilings in Tinkers Cross
Tinkers Cross is in Hampshire. We work across Tinkers Cross and the surrounding area, from older terraces and semis to flats, workplaces and outbuildings. We cover 683 places in Hampshire. Our area stretches from Tinkers Cross to Southampton (about 18 miles away).
A school like Fordingbridge Junior School should know from its asbestos register whether coatings have been tested.
Here we cover the SP6 postcode area, and your Artex job can be anywhere in it. Your property could be on Linguire Lane, Neave Road and Seton Way or the roads around them, wherever it is in Tinkers Cross. For properties just outside Tinkers Cross, we cover Lower Burgate (1 mile east), Fordingbridge (1 mile south), Upper Burgate (1 mile north-east), Horseport (1 mile south-east) and Criddlestyle (1 mile south-east). Larger places within reach include Totton (13 miles east), Romsey (14 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south-east) and Marchwood (15 miles east).
Other landmarks nearby include Fordingbridge Museum (0.8 miles south-east) and Godshill Castle Hill (1.5 miles east). Green spaces nearby include Blashford Lakes.
- Nearby schools include The Burgate School and Sixth Form (0.5 miles east)
- Local pubs include The Ship Inn (0.9 miles south)
For businesses and landlords in Tinkers Cross
Void periods are a good time for asbestos work, when rooms are empty and work can be done without disruption.
If you manage or own a block in Tinkers Cross, the register for shared areas needs keeping current and sharing with trades, and condition checked regularly.
After we’ve finished in Tinkers Cross
Tell your plasterer and electrician what was done.
Keeping things safe:
- Keep the results and paperwork
- Send photos of the coatings
- Keep pets out of the work area
- Book your plasterer after removal
Don’ts
Do not drill or cut into textured ceilings until you know what they contain.
Plan testing before the renovation starts.
Options to consider in Tinkers Cross
You will find DIY products for removing Artex, but if it contains asbestos, the job needs proper controls. Test first. Our quotes are clear about VAT, so you can compare like with like.
How we work in Tinkers Cross
- Identify first, remove only when needed
- Quotes that spell out the scope
- London, Kent, Surrey, Sussex and beyond
- Reports and results you can share
See our prices page and published price ranges.
Your questions about Artex removal in Tinkers Cross
Do you cover small places like Tinkers Cross?
We do: small villages are covered too. Tell us about access and parking.
Do textured ceilings in Tinkers Cross homes contain asbestos?
Some older coatings do, and many do not. Testing a sample is the only way to know.
Does asbestos always have to come out?
Not always. If it’s in good condition and nobody will disturb it, leaving it in place and checking it can be the safer choice.
Is it better to remove the coating or the ceiling?
Both work; it depends on the room. We’ll advise for each room.
Do you work in flats?
Yes. For shared areas, ask the managing agent about the asbestos register.
Do I need a test or a survey?
A test checks specific materials; a survey checks a whole building or work area. For building work, a survey is usually needed.
Do you give written quotes?
Always: you get the scope and price in writing, and whether VAT is included.
How dangerous is asbestos?
Asbestos is a hazard when its fibres get into the air. Diseases linked to it, such as mesothelioma and asbestosis, can appear many years later, which is why it’s identified before work.
Also near Tinkers Cross
Other services in Tinkers Cross
What we do and don’t cover
The usual limits are:
- Other asbestos materials found in the room are dealt with separately
- We leave the surface ready for your plasterer
- Larger-scale steam or gel removal must be notified before it starts, which affects the start date
If in doubt, ask: we’ll recommend a test, a survey or removal.
What we deal with
- Swirl and stipple patterns
- Patched or painted coatings
- Artex ceilings
- Ceiling roses and cornices (coated)
- Textured walls
- Coated plasterboard
What it might be made of
Textured walls
Walls are treated like ceilings.
Patched areas
We may sample patches separately.
How we price Artex removal
What drives the price:
- How much waste there is
- The number of samples or the size of the building
- How easy it is to reach
- Licensed or non-licensed
Identifying asbestos early is cheaper than stopping work later, when everything has to stop.
Sending photos
Photo tips:
- Damaged areas
- Any labels or markings, if you can see them safely
- How we’d reach it
- A close-up from a safe distance
Unsure whether you need a test, a survey or removal? Use our quote form or call 07833 053 749, and we’ll advise.
How it works
The coating is softened with water, steam or gel and removed with hand tools, with no sanding or dry scraping. Before we leave, we explain what we did and what comes next.
- Get in touch with photos
- We test a sample of each coating
- We talk through the options
- We remove it safely if that’s what you choose
- The waste goes to a permitted site with a consignment note
How to prepare
- Let us know where we can park
- Leave the suspect material alone until we arrive
- Move things out of the way carefully
Getting a price
For an accurate quote, tell us what you’ve found, where it is and what you are planning. Then ring 07833 053 749, or send the details through our contact page.
Read more
- Nothing removed blind: unknown materials are tested first
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Everything in writing: quotes, reports, results and waste notes
- Waste sealed and labelled, then taken to a permitted site