A surveyor in a half-mask respirator holding a scraper and a sealed sample bag inside a house

Hampshire · England

Asbestos Sampling and Testing in Faberstown, Hampshire

Asbestos testing in Faberstown, from older homes to workplaces. Every job is quoted in writing.

  • One-off checks in rented property
  • Soffit boards
  • Garage roofs before replacement

Request a quote Call 07833 053 749

Need asbestos testing in Faberstown?

Asbestos testing near Faberstown

A test answers one question: is this material asbestos? In Faberstown, we take samples of suspect materials and send them to an accredited laboratory, so you know before you drill, sand or remove anything. Whether it’s boiler cupboard panels and answers trades need before starting, we cover textured ceilings, panels behind heaters and black adhesive.

Village homes in areas like Faberstown often mix old and newer materials, so each material needs its own test. We start with a clear answer: what the material is, and what that means for your plans.

A sample being taken from an outbuilding
Location
Faberstown (SP11)
County
Hampshire
Covers
Samples analysed by an accredited lab
You receive
Lab result in writing
Quote
A written quote before work starts
Telephone
07833 053 749
Page updated
26 October 2026

What happens next

If the result shows a higher-risk material such as insulating board or lagging, the work will typically be licensed, and we will explain what that involves.

Once we’re done:

  • Do not touch it before we arrive
  • Not sure between a test and a survey? Ask
  • Photos of the material help us plan
  • Tell us what work you are planning

What to avoid

If a material is already damaged, keep people and pets away from it, and do not try to clean it up.

Get the result before work is booked, so you can plan properly.

DIY and asbestos

With a professional job, you get a record: results, a report or a consignment note, which buyers and builders may ask for.

If you do find something during DIY, stop: leave the area, don’t clean it up, and ask for advice.

The process

Taking a sample is usually quick; the laboratory analysis takes longer. Unexpected finds are discussed with you first.

  1. Describe the material and send a photo
  2. You get a quote for the samples needed
  3. We take each sample safely and seal it
  4. The laboratory analyses the samples
  5. We send the result and explain it

Before we arrive

  • Ensure we can get to the area
  • Keep children and pets away on the day
  • Mention any parking restrictions

How to get a quote

For an accurate quote, tell us what you’ve found, where it is and what you are planning. Fill in the enquiry form or give us a call on 07833 053 749.

Ask for a quote

Related guides

How we price asbestos testing

What drives the price:

  • Which survey type fits your plans
  • How much sampling is needed
  • How many outbuildings are included
  • Parking and access charges

There is no one-size price, as every job differs. Our guides list published price ranges from other companies, with sources.

Sending photos

The most useful photos are:

  • A rough size or measurement
  • Street parking nearby
  • A closer photo of the material, without touching it
  • Any labels or markings, if you can see them safely

Not sure what you need? Fill in the enquiry form or give us a call on 07833 053 749 and describe the problem, and we’ll advise.

Testing materials in Faberstown

Faberstown is about 5 miles north-west of Andover, in Hampshire. Anywhere in Faberstown, just send the postcode. Faberstown is one of 683 towns and villages in Hampshire where we work. Our area stretches from Faberstown to Southampton (about 24 miles away).

For rented homes around Andover station, testing before work avoids delays.

We handle tests in every part of SP11 and the streets around it. That could mean a property on Andover Road and Shoddesden Lane. For properties just outside Faberstown, we cover Redenham (1 mile east), Appleshaw (1 mile east), Fyfield (2 miles south), Chute Forest (2 miles north-east) and Clanville (2 miles east). We also cover nearby towns such as Andover (5 miles south-east), Tidworth (3 miles west), Whitchurch (11 miles east), East Anton (6 miles east), Overton (14 miles east) and Picket Piece (7 miles east).

Other landmarks nearby include Andover War Memorial Hospital (4.5 miles south-east) and Ludgershall Castle (1.8 miles north-west). Within reach you’ll find Quarley Hill and Anton Lakes.

Map of Faberstown © OpenStreetMap contributors

What we do and don’t cover

Before you book, note that:

  • Testing doesn’t look for anything else, so bigger work needs a survey
  • A result tells you what the material is, not how to remove it
  • Photos can’t confirm asbestos; only a lab can

If in doubt, ask: we’ll recommend a test, a survey or removal.

Common materials

  • Bitumen adhesive
  • Artex and textured ceilings
  • Flue pipes
  • Roof felt
  • Floor tiles
  • Panels behind heaters
  • Pipe lagging
  • Garage roof sheets
  • Soffit boards
  • Water tanks

More about this service

Typical tests in Faberstown

HSE advises that samples are best taken by a competent person, because taking a sample disturbs the material.

Common situations in older properties include:

  • Textured ceilings before a renovation
  • One-off checks in rented property
  • Boiler cupboard panels
  • Tiles found under carpet

If you live in an older house in Faberstown, a quick test before work is sensible.

Questions to ask before booking

  • Which areas are covered, and which are not
  • VAT, clearly stated
  • What the report or result will contain
  • What exactly is included: the areas, materials or samples

What to check before booking

A closer look at the materials

Floor tiles and adhesive

We test tiles and adhesive separately where needed, because results can differ.

Textured coatings

Artex and similar coatings are a frequent request. Some contain a small amount of asbestos.

Choosing the right option

You can buy home testing kits, but you take the sample yourself, which means disturbing the material. HSE advises that a competent person takes samples. Access makes a big difference to cost, so photos of the area and the way in help us quote accurately.

Why choose us

  • Recommendations in plain English
  • Management, refurbishment and demolition, and pre-purchase surveys
  • Houses, flats and business premises
  • Condition assessed for every material

Take a look at our prices page and our cost guide.

Your questions about asbestos testing in Faberstown

Do you work near Andover station?

Yes. Andover station is about 4.7 miles south-east of Faberstown, and we cover both.

Do you come out to small villages like Faberstown?

We do: small villages are covered too. Just tell us how to reach the property.

Will I get the price in writing?

Every time: the quote is in writing and sets out what’s included, and whether VAT is included.

How quickly can you come out?

It depends on the job and our diary. We’ll give you dates when we quote.

When will I get the result?

Timing depends on the lab. We will give you an idea when we book.

Do you work on commercial premises?

Yes. Tell us the size and use of the building and what you need.

Do I get anything in writing afterwards?

That depends on the job: a report for a survey, a lab result for a test, or waste paperwork for removal.

Do you do air testing?

Clearance air testing after licensed removal must be done by an independent analyst accredited by UKAS. Ask us and we will explain what applies to your job.

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote