Kent · England
Artex Removal for Barfrestone
Artex removal in Barfrestone: removal of textured ceilings and walls. Done to HSE guidance, with paperwork for your records.
- Ceilings before downlights go in
- Walls before a kitchen or bathroom refit
- Ceilings before plastering
Need Artex removal in Barfrestone?
Materials we deal with
Artex ceilings
A small sample from each different coating tells you whether it contains asbestos.
Textured walls
Walls are treated like ceilings.
Artex removal for Barfrestone properties
Textured coatings like Artex were used on ceilings and walls for decades, and older ones can contain a little asbestos. We test the coating, then remove it safely if it contains asbestos. Typical materials include stipple finishes, swirl patterns and coated plasterboard, and typical jobs are ceilings before plastering and coatings scraped during DIY.
In a village like Barfrestone, textured coatings turn up in cottages and later homes alike. Everything is explained in plain English, including when it’s better to leave a material in place.
- Area
- Barfrestone (CT15)
- Region
- Kent
- Service
- Artex tested, then removed with wet methods
- Afterwards
- Lab result and consignment note
- Price
- Written quote for your job
- Call
- 07833 053 749
- Updated
- 26 October 2026
Landlords, managing agents and employers
Letting agents often ask about asbestos before maintenance work. A test or a survey gives everyone a clear answer.
Landlords of garage blocks and outbuildings should find out whether the roofs are asbestos cement, before anyone carries out repairs.
Should you do it yourself?
HSE advises the public not to repair or remove asbestos themselves. Licensed materials are strictly for licensed contractors.
Fragile roofs are a serious falls risk, as well as an asbestos risk, so stay off it.
Places near Barfrestone
Other services in Barfrestone
Textured ceilings in Barfrestone
Barfrestone is about 5 miles north-west of Dover, in Kent. We work across Barfrestone and the surrounding area, on everything from houses and flats to workplaces and garages. We cover all 922 towns and villages in Kent, from the larger towns to small villages. Our area stretches from Barfrestone to Canterbury (about 9 miles away).
For a school such as Eythorne Elvington Community Primary School, the duty holder’s records should show any coatings. If you are refurbishing flats near Shepherds Well station, coatings can be tested while the flat is empty. Parts of the Kent Downs National Landscape are within about 7 miles of Barfrestone; cottages and farmhouses nearby can have textured coatings too.
Wherever your property is in CT15, Artex removal is available, from busy streets to quiet lanes. If your property is just outside Barfrestone, we also cover Frogham (1 mile north-west), Elvington (1 mile east), Nonington (1 mile north-west), Snowdown (2 miles north-west) and Woolage Village (2 miles west). Larger places within reach include Canterbury (9 miles north-west), Margate (14 miles north-east), Dover (5 miles south-east), Folkestone (9 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).
Nearby you will also find Buckland Hospital (5.5 miles south-east).
Common questions in Barfrestone
How far is Barfrestone from London?
Barfrestone is about 61 miles from central London, well within our area.
Do older homes in Barfrestone have asbestos?
That depends on when it was built and altered: asbestos products were used until 1999, so pre-2000 homes and extensions in Barfrestone may have it. Garage roofs, Artex, floor tiles, soffits and flues are typical examples.
What does it cost to remove Artex?
Room size, method and waste all affect the price. We quote once we know what it contains.
What does licensed work mean?
Licensed work is work on the materials most likely to release fibres: lagging, sprayed coatings and most asbestos insulating board. Only a contractor holding an HSE licence can do it.
Can you advise before I buy a property?
Yes, a pre-purchase survey can help, with the seller’s permission.
When can you start?
That depends on the work and current bookings. We will give you dates when we quote.
Is Artex removal licensed work?
Normally not, according to HSE. Larger steam or gel jobs must be notified first.
What’s the difference between a test and a survey?
A test checks specific materials; a survey checks a whole building or work area. For building work, a survey is typically needed.
How we work
On the day, we seal off the room and protect floors and fittings, and keep the coating damp as we work. While we work, the area stays out of bounds, so arrange for pets and children to be elsewhere.
- Send photos of the textured surfaces
- We arrange testing
- We explain your options: leave, cover or remove
- We carry out the removal
- We dispose of the waste legally
How to prepare
- Move belongings away from the area, without touching the material
- Dig out previous surveys
- Clear access to the area, loft or garage
Ask for a quote
To get a quote, ring 07833 053 749, or send the details through our contact page. Tell us the postcode, what the material is and where, and send photos if you can.
Helpful guides
What it costs
The biggest factors in the price are:
- Access: height, lofts, steps and space
- How much there is
- Licensed or non-licensed
- The type of material and its condition
Identifying asbestos early is cheaper than stopping work later, when everything has to stop.
Helping us quote
The most useful photos are:
- Where we could park
- Labels, if any
- Approximate dimensions
- A clear close-up
The quickest way to a quote is to send photos and the postcode: just use our quote form or call 07833 053 749.
Options to consider in Barfrestone
Strip the coating or take the boards down? Stripping keeps the ceiling; taking boards down whole can be quicker and cleaner in some rooms. Every quote says whether VAT is included, so you can compare like with like.
Why people choose us
- Waste taken to a permitted site with a consignment note
- Clear written quotes
- Samples analysed by an accredited laboratory
- Work planned to HSE guidance and the regulations
Take a look at our prices page and our cost guide.
Limits to be aware of
Worth knowing before booking:
- Plastering and making good are usually separate jobs
- Big jobs need notifying in advance, so allow time
- We need the room cleared
Not sure what you need? Send us photos and we will tell you honestly before you book.
Materials in Barfrestone
- Artex ceilings
- Patched or painted coatings
- Coated plasterboard
- Textured walls
- Ceiling roses and cornices (coated)
- Swirl and stipple patterns
Afterwards
The ceiling or wall is left ready for your plasterer.
Once you know what’s there, a few simple habits help:
- Keep pets out of the work area
- Line up the plasterer for afterwards
- Keep the results and paperwork
- Send photos of the coatings
Things not to do
Never sand or dry-scrape Artex before testing.
If a coating has been damaged by a leak, keep people away from fallen pieces.
- Survey or test first when it isn’t clear what a material is
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Written paperwork: reports, results and waste consignment notes
- Waste sealed and labelled, then taken to a permitted site