Kent · England
Artex Removal in Elvington
Looking for Artex removal in Elvington? We work across Elvington and the towns around it, with plain-English advice and a written quote.
- Ceilings due for rewiring or new downlights
- Ceilings coming down
- Loft conversions
Artex removal in Elvington
Step by step
At the end, the room is cleaned and checked before the seals come down. We begin by confirming exactly what we are doing, so there is no confusion.
- Tell us which rooms and surfaces
- We test the coating if it hasn’t been tested
- We plan the removal and send a quote
- We seal off the room and remove the coating wet
- We clean up and send the waste paperwork
Before we arrive
- Have any previous surveys or test results ready
- Keep the area clear of children and pets
- Clear access to the area, loft or garage
Get a quote
If you have a survey or test result, include it when you fill in the enquiry form or give us a call on 07833 053 749; it helps us quote accurately.
Read more
Artex removal near Elvington
According to HSE, textured coating work is normally non-licensed. Bigger jobs using steam or gel must be notified before they start. Common materials are coated plasterboard, swirl patterns and coated ceiling roses, and typical jobs are ceilings due to be knocked through or removed and loft conversions.
Village homes like those in Elvington have often been altered several times, so ceilings may have been coated during an earlier renovation. Everything is explained in plain English, including when it’s better to leave a material in place.
- Where
- Elvington (CT15)
- County
- Kent
- Covers
- Testing and removal of textured coatings
- Afterwards
- Test result and waste paperwork
- Price
- Written quote for your job
- Phone
- 07833 053 749
- Updated
- 26 October 2026
Prices and what affects them
Every quote reflects:
- Access: height, lofts, steps and space
- How much there is
- Licensed or non-licensed
- Parking and access charges
How easy the material is to reach affects the price, so tell us about access.
What to photograph
For a quick quote, include:
- A rough size or measurement
- A close-up from a safe distance
- A wide shot showing where the material is
- Any damage, cracks or broken pieces
Tell us about the material, its location and your plans. Fill in the enquiry form or give us a call on 07833 053 749.
Your options compared
You will find DIY products for removing Artex, but if it contains asbestos, the job needs proper controls. Test first. Compare what each quote includes, not just the total: scope, method, waste disposal and paperwork.
What you get
- Honest advice, even when the answer is to leave it
- Work planned to HSE guidance and the regulations
- Written quotes that say what’s included
- Identify first, remove only when needed
Read how we quote or published price ranges.
Elvington: your questions answered
Do you work on properties in the Kent Downs National Landscape?
Yes, the same rules apply there, but access to farm and rural buildings can take planning.
Do you cover Elvington and the area around Shepherds Well station?
Yes. Shepherds Well station is about 1.9 miles south-west of Elvington, and we cover both.
Do you need to see it before quoting?
Often we can quote from clear photos and a description; otherwise we will arrange a visit.
Is damaged asbestos an emergency?
Keep people away from damaged material and do not clean it up yourself. Then contact us and we will advise on the next step.
Should I check for asbestos before buying?
Of course. With the seller’s agreement, a pre-purchase survey tells you what’s there before you commit.
When can you start?
That depends on the work and current bookings. You will get available dates with the quote, and notifiable work needs notifying before it starts.
Can I put asbestos in a skip?
Never: skips and household bins can’t take asbestos. It must go to a permitted site.
What if my house is newer?
Buildings from after 2000 shouldn’t, because of the 1999 ban, but older parts and reused materials can still contain it.
For landlords, agents and businesses
If you’re responsible for a non-domestic building or the common parts of flats in Elvington, you have a duty to manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.
Letting agents often ask about asbestos before maintenance work. A test or a survey gives everyone a clear answer.
Towns and villages near Elvington
Also in Elvington
Materials, one by one
Artex ceilings
Swirl, stipple and other patterns on ceilings are the most common textured coatings.
Coated plasterboard
The coating sits on plasterboard or plaster. Removing the boards can be an option.
Common reasons for Artex jobs in Elvington
Many trades want a test result first.
These come up again and again:
- Textured walls before a refit
- Ceilings due for plastering or skimming
- Flaking textured ceilings
- Loft conversions and extensions
Older homes across Elvington may have coatings added during past renovations.
Before booking anyone
- Waste disposal and the consignment note
- That samples are analysed by an accredited laboratory
- Suitable insurance for the work
- What category of work it is
What’s included, and what is not
Worth knowing before you book:
- Other asbestos materials found in the room are dealt with separately
- The room being worked on has to be empty and sealed off
- Larger-scale steam or gel removal must be notified before it starts, so allow time
Not sure what you need? Send us photos and we will tell you honestly.
What we deal with
- Textured walls
- Coated plasterboard
- Swirl and stipple patterns
- Ceiling roses and cornices (coated)
- Patched or painted coatings
- Artex ceilings
Textured ceilings in Elvington
Elvington is about 5 miles north of Dover, in Kent. Anywhere in Elvington, just send the postcode. Elvington is one of 922 places in Kent where we work. You can also see our page for Canterbury, about 9 miles away.
Non-domestic buildings like Eythorne Elvington Community Primary School should already have records of any textured coatings, before decorators start. If you’re refurbishing a rental near Shepherds Well station, coatings can be tested while the flat is empty. Elvington is within about 8 miles of the Kent Downs National Landscape; cottages and farmhouses nearby can have textured coatings too.
We carry out Artex jobs all over the CT15 postcode area. We can help with Artex jobs on streets such as Sweetbriar Lane, Poplar Drive and Fairview Road or the roads around them. If your property is just outside Elvington, we also cover Barfrestone (1 mile west), Frogham (1 mile west), Tilmanstone (2 miles east), Nonington (2 miles north-west) and Chillenden (2 miles north). Within a short drive, we also work in Canterbury (9 miles north-west), Margate (13 miles north-east), Dover (5 miles south), Folkestone (9 miles south-west), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Other landmarks nearby include Buckland Hospital (5.5 miles south).
- Pubs nearby include The White Horse pub (0.6 miles south)
Doing it yourself?
Home testing kits exist, but you have to disturb the material to use one. HSE recommends a competent person takes samples.
HSE’s advice to the public is not to try to repair or remove asbestos yourself. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.
- Nothing removed blind: unknown materials are tested first
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Paperwork for your records: reports, lab results and consignment notes
- Waste sealed and labelled, then taken to a permitted site