Oxfordshire · England
Artex Removal in Wolvercote
Buildings in Wolvercote built or refurbished before 2000 can contain asbestos. Our artex removal service covers removal of textured ceilings and walls.
- Coatings damaged by DIY
- Ceilings due for plastering or skimming
- Ceilings before downlights go in
Artex removal in Wolvercote
Options to consider in Wolvercote
A low price may mean shortcuts, which releases fibres. Ask how the coating will be removed and where the waste goes. Identifying asbestos early is cheaper than stopping work later, when the whole project can be held up.
How we work in Wolvercote
- No removal until we know what it is
- Clear advice on your options
- Work planned to HSE guidance and the regulations
- Lab analysis by an accredited laboratory
Take a look at our prices page or published price ranges.
How artex removal works in Wolvercote
Skimming or boarding over an intact coating avoids disturbing it, but the asbestos is still there and should be recorded for future work. From rented flats before redecoration and flaking textured ceilings, we cover coated ceiling roses, Artex ceilings and coated plasterboard.
Village homes like those in Wolvercote have often been altered several times, so ceilings may have been coated during an earlier renovation. If you’re unsure what you need, ask: we will tell you honestly whether it’s a test, a survey or removal.
- Where
- Wolvercote (OX2)
- Area hub
- Oxfordshire
- What we do
- Testing and removal of textured coatings
- Afterwards
- Test result and waste paperwork
- Quote
- Written quote for your job
- Telephone
- 07833 053 749
- Updated
- 26 October 2026
Wolvercote questions
Do you cover Wolvercote from London?
We cover Wolvercote, about 55 miles from central London.
Do you work near Oxford Parkway station?
Yes, we cover Wolvercote and the area towards Oxford Parkway station, about 1.5 miles north-east.
Is asbestos dangerous?
Breathing in asbestos fibres can cause serious diseases, often decades later. The risk comes mainly from disturbing materials that contain it, so identifying it before work is important.
Can I plaster over Artex that contains asbestos?
Skimming or boarding over an intact coating avoids disturbing it, but don’t sand it first, and record that it’s there.
Do you work on commercial premises?
Yes: shops, offices, industrial units and community buildings as well as homes. Non-domestic premises have a duty holder who should hold an asbestos register.
Do I need a test or a survey?
A test checks specific materials; a survey checks a whole building or work area. For building work, a survey is normally needed.
Is damaged asbestos an emergency?
First, keep everyone away and don’t clean it up. Then contact us and we’ll advise on the next step.
Can you advise before I buy a property?
Yes. With the seller’s agreement, a pre-purchase survey tells you what’s there before you commit.
Good to know
Before booking, note that:
- Plastering and making good are generally separate jobs
- Big jobs need notifying in advance, which affects the start date
- The room being worked on has to be empty and sealed off
Not sure what you need? Send us photos and we’ll tell you honestly before you book.
Common materials
- Coated plasterboard
- Patched or painted coatings
- Swirl and stipple patterns
- Textured walls
- Artex ceilings
- Ceiling roses and cornices (coated)
Doing it yourself?
Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.
Working on a fragile asbestos cement roof is dangerous in itself, quite apart from the asbestos, so stay off it.
After the job
If other rooms have textured coatings, record whether they’ve been tested, so future work is planned properly.
Once we are done:
- Send photos of the coatings
- File the test result and waste note
- Give us room sizes
- Test every different coating
Things not to do
Hold off on drilling until you have a result.
Test before the builders arrive.
How we work
We bag and label the waste as we work, for disposal at a permitted site. Nobody else needs to be in the work area, so please keep children and pets away.
- Send photos of the textured surfaces
- We arrange testing
- We explain your options: leave, cover or remove
- We carry out the removal
- The waste goes to a permitted site with a consignment note
Before we arrive
- Don’t disturb the material before we get there
- Let us know if something’s broken
- Move belongings away from the area, without touching the material
Ask for a quote
You’ll get a written quote. Just fill in the enquiry form or give us a call on 07833 053 749 with the details, including any survey or test you already have.
Read more
Typical Artex jobs in Wolvercote
Textured coatings were popular for decades because they hid cracks and uneven plaster, and some included a little chrysotile.
People usually contact us about one of these:
- Extensions that cut into ceilings
- Coatings scraped during DIY
- Rented homes refurbished between tenants
- Ceilings before downlights go in
Older homes across Wolvercote may have coatings added during past renovations.
Before you book anyone
- Laboratory analysis by an accredited lab
- What you will receive afterwards: a report, results or waste paperwork
- Whether VAT is included
- Whether the job needs notifying
What affects the price in Wolvercote
The biggest factors in the price are:
- Waste quantity and disposal
- Access: height, lofts, steps and space
- The category of work
- Location, parking and any London charges
What you pay depends on the job itself: the materials, the amount, access and what paperwork is needed. We quote each job individually.
Helping us quote
Photos help us understand the job before we visit. Take them without disturbing anything:
- The route in: gates, steps, stairs or the loft hatch
- An idea of size
- Any damage, cracks or broken pieces
- A close-up from a safe distance
Send us the address in Wolvercote, a description and some photos: fill in the enquiry form or give us a call on 07833 053 749.
Materials, one by one
Artex ceilings
Swirl, stipple and other patterns on ceilings are the most common textured coatings.
Patched areas
We may sample patches separately.
Places near Wolvercote
What else we do in Wolvercote
Textured ceilings in Wolvercote
Wolvercote is about 3 miles north-west of Oxford, in Oxfordshire. Homes, landlords and businesses in Wolvercote contact us for Artex jobs about all kinds of jobs. We cover all 443 towns and villages across Oxfordshire, from the larger towns to small villages.
For rented flats close to Oxford Parkway station, a void period is a good time to deal with textured ceilings. For a school such as Wolvercote Primary School, the duty holder’s records should show any coatings.
Here we cover the OX2 postcode area, and your Artex job can be anywhere in it. Streets in the area include Home Close, Godstow Road and Baynhams Drive, and Artex removal is available on all of them. Other places close to Wolvercote we cover include Godstow (1 mile south-west), Binsey (1 mile south), Sunnymead (1 mile east), Cutteslowe (1 mile east) and Summertown (1 mile east). Larger places within reach include Oxford (3 miles south-east), Didcot (12 miles south), Bicester (10 miles north-east), Abingdon-on-Thames (7 miles south), Witney (9 miles west) and Carterton (13 miles west).
Well-known places in the area include Oxford Castle (2.6 miles south-east) and Acland Hospital (2.1 miles south-east). The countryside around Wolvercote includes Hook Meadow and The Trap Grounds and Harcourt Hill.
- Nearby schools include St Edward's School (1.1 miles south-east) and Oxford Academy (1.5 miles south-east)
- Pubs nearby include The White Hart Public House (less than half a mile south-west)
- Parks and local facilities nearby include St Hugh's College Main Building Including Library (1.7 miles south-east)
- Identify it first: we test or survey before planning removal
- Done to the regulations: HSE guidance and CAR 2012
- Paperwork for your records: reports, lab results and consignment notes
- Asbestos waste double-bagged or wrapped and taken to a permitted site