Greater London · England
Artex Removal for Cyprus
Artex removal across Cyprus, for houses, flats and commercial buildings. Every job is quoted in writing.
- Structural work through coated ceilings
- Damaged or cracked coatings
- Rented homes refurbished between tenants
Artex removal near Cyprus
Step by step
Our team wears protective equipment, and keep the room closed while we work. We go over the plan with you first, so you know what’s happening.
- Tell us which rooms and surfaces
- We test the coating if it hasn’t been tested
- We plan the removal and send a quote
- The coating is removed with controls
- The room is cleaned and you get the paperwork
How to prepare
- Let neighbours know if the work is near them
- Dig out previous surveys
- Keep away from the material in the meantime
Getting a price
Unsure whether you need a test, a survey or removal? Call 07833 053 749 or use our quote form, and we’ll recommend the right option.
Related guides
Artex removal in Cyprus
Textured coatings like Artex were used on ceilings and walls for decades, and older ones can contain a little asbestos. We test first, then remove the coating with controlled wet methods if needed. Whether it’s coatings already disturbed and walls before a kitchen or bathroom refit, we cover Artex ceilings, textured walls and stipple finishes.
Ceilings in Cyprus conversions can have more than one coating, so we test each coating. Our quotes are written and say what’s included, so there are no surprises.
- Area
- Cyprus (E6, E16)
- County
- Greater London
- Covers
- Textured ceilings and walls
- Paperwork
- Result and waste note
- Quote
- Quoted individually, in writing
- Phone
- 07833 053 749
- Last updated
- 26 October 2026
Artex removal around Cyprus
Cyprus is about 2 miles east of Canning Town, in Greater London. If your Artex job is in Cyprus, let us know about access when you get in touch. Cyprus is one of 764 places in Greater London we cover. Our nearest city page is London, about 7 miles away.
If your home is one of the older properties in Cyprus, near St Michael and All Angels Church or elsewhere, textured ceilings may date from an earlier renovation. For rented flats close to Woolwich station, textured ceilings can be tested between tenancies.
Wherever your property is in E6 and E16, Artex removal is available. Local streets include Strait Road, Harper Road and Trader Road; we cover every one. If your property is just outside Cyprus, we also cover Beckton (1 mile north-east), North Woolwich (1 mile south), Royal Docks (1 mile west), East Ham (1 mile north) and Custom House (1 mile west). Larger places within reach include London (7 miles west), City of Westminster (9 miles west), Marylebone (9 miles west), Kensington (11 miles west), St Pancras (8 miles west) and Shoreditch (6 miles west).
As a London location, Cyprus is inside the ULEZ, and parking and loading need planning: let us know about parking and access when you get in touch.
A little further out are Greenwich Castle (3.6 miles south-west) and North Woolwich Old Station Museum (0.7 miles south). The countryside around Cyprus includes Gilbert's Pit.
- Local schools include London Design and Engineering UTC (less than half a mile south-west) and Oasis Academy Silvertown (0.6 miles south)
- Local facilities include East Ham (1.6 miles north)
How we price Artex removal
Every quote reflects:
- The type of material and its condition
- Access: height, lofts, steps and space
- Waste quantity and disposal
- Parking and access charges
Every quote says whether VAT is included.
Photos that help
Photo tips:
- A rough size or measurement
- Visible markings
- Cracks or breaks
- Street parking nearby
If you have a survey or test result, include it when you send photos through our quote form, or phone 07833 053 749; it helps us quote accurately.
Your questions about Artex removal in Cyprus
Do you work in Cyprus despite London parking restrictions?
We do. Tell us about parking, permits and access so we can plan; all of Greater London is inside the ULEZ.
Do you cover Cyprus and the area around Woolwich station?
Yes, we cover Cyprus and the area towards Woolwich station, about 1.3 miles south.
How much does Artex removal cost in Cyprus?
It depends on the area, the method and the waste, and we quote once the coating has been tested.
Is a home built after 2000 likely to contain asbestos?
Buildings from after 2000 shouldn’t, because of the 1999 ban, but older parts and reused materials can still contain it.
Do I need to be at home?
We need access to every area in the job.
Do you cover Cyprus?
Yes, Cyprus is in our area. Send us the postcode for a quote.
Do I need a test or a survey?
Testing tells you about particular materials; a survey looks at everything in scope, including things you hadn’t spotted.
Do you work for landlords and businesses?
Yes: homeowners, landlords, managing agents, businesses and contractors. Tell us about the property and what you need.
Landlords, managing agents and employers
Community buildings count as non-domestic premises, so whoever runs them has a duty to manage asbestos.
Void periods are a good time for asbestos work, while the property is empty.
Materials, one by one
Textured walls
Walls can have textured coatings too.
Painted coatings
Many coatings have been painted over, which doesn’t change what’s underneath.
Towns and villages near Cyprus
Other services in Cyprus
Where asbestos turns up
Most problems come during renovation: sanding, dry scraping or drilling.
If any of these sound familiar, it’s worth getting advice:
- Ceilings due for plastering or skimming
- Rented flats before redecoration
- Structural work through coated ceilings
- Coatings damaged by DIY
Non-domestic buildings like Winsor Primary School should already have records of any textured coatings, before decorators start.
Questions to ask before booking
- What paperwork you get
- Whether the job needs notifying
- Laboratory analysis by an accredited lab
- Where the waste goes, with paperwork
Afterwards
Keep the test result and waste paperwork with your property records.
To avoid problems in future:
- Clear the rooms before the work
- Line up the plasterer for afterwards
- Plan where you’ll stay or work while rooms are closed off
- Send photos of the coatings
Things not to do
Never sand or dry-scrape Artex before testing.
Do not sand, scrape dry or wire-brush a textured coating before it’s been tested.
Options to consider in Cyprus
DIY removal products are sold for textured coatings, but if it contains asbestos, the job needs proper controls. Always test first. Dealing with asbestos before building work is normally cheaper than finding it mid-job, when the whole project can be held up.
Why choose us
- Lab analysis by an accredited laboratory
- Waste taken to a permitted site with a consignment note
- Work planned to HSE guidance and the regulations
- No removal until we know what it is
Read how we price jobs or published price ranges.
What’s included, and what isn’t
We’re upfront about what’s included:
- The room being worked on has to be empty and sealed off
- Other asbestos materials found in the room are dealt with separately
- Larger-scale steam or gel removal must be notified before it starts, which affects the start date
If in doubt, ask: we’ll recommend a test, a survey or removal.
Materials in Cyprus
- Ceiling roses and cornices (coated)
- Textured walls
- Artex ceilings
- Patched or painted coatings
- Swirl and stipple patterns
- Coated plasterboard
- Nothing removed blind: unknown materials are tested first
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Everything in writing: quotes, reports, results and waste notes
- Waste sealed and labelled, then taken to a permitted site